成av人片一区二区三区久久,少妇BBBB搡BBBB韩国,极品91尤物被啪到呻吟喷水,人妻91无码色偷偷色噜噜噜
Hot air gun manufacturer

News

Contact

Shenzhen de Hi Tech Co., Ltd.

Contact: Mr. Chen

Telephone: 0755-27872999

Fax: 0755-22636863

URL: czgnselec.com

Address: Shenzhen City, Baoan District Xin'an Yang Tian72 District Luther to high-tech park 11


Your current location: Home >> News >> technical knowledge

Hot air gun fault treatment method hot air gun factory

Hot air gun fault treatment method hot air gun factory

Release date:2017-07-22 The author: Click on:

Hot air gun is one of the most commonly used tools in hot air gun manufacturers. How to deal with the trouble of hot air gun in the life? How to deal with the main board disconnection of hot air gun?:


Hot blast gun motherboard disconnection processing method


Motherboard disconnection and drop points are mostly caused by improper operation, do you know why? I tell you, especially with glue CPU most easily caused by improper operation of the motherboard and broken off the following points, I introduce myself to win with glue CPU experience for everyone, the scale air volume to heat to hot air gun 5.5 hot air gun 6.5-7 actual temperature is 270 degrees -280 degrees straight to CPU blowing everyone knows CPU the general heat sealing glue after soft such as: Philips Po Samsung 998 is on the soft sealing glue first heating clean CPU around after moving to CPU, to CPU CPU to make uniform heating below all melts in tin CPU so we don't have a break and drop point the situation, whether you want to put the tape on the motherboard or you can do on the CPU, you do with a screwdriver flat shovel, is for tin plate material, cut to 2CM wide grinding blade can be like With the special tool clamp it, when you put the CPU below the tin melt your own tools inserted below in the CPU you want to tape to CPU you put down the tool board inserted down, if you want to put the tape to the motherboard that you put down the tools below CPU you can plug it, you know why it is broken and lost, because you are not the most CPU uniform heating tin melt in a small part of the heating is not completely melted tin caused, we all pay attention to why break and drop points on the board a small tablet many other tracts are not broken off and board points ah this is you in the use of air gun was not caused by the uniform heating of CPU.


Hardware tool manufacturer


This article URL:http://czgnselec.com/en/news/349.html

Related tags:Hardwaretoolmanufacturer

Recently Viewed:

成av人片一区二区三区久久,少妇BBBB搡BBBB韩国,极品91尤物被啪到呻吟喷水,人妻91无码色偷偷色噜噜噜